
Which date sets the battery rebate: the installation, not the contract
The short answer
The installation date sets the federal battery discount, often called the battery rebate, not the date you sign a contract. In practice, the date that counts is the one on the battery's certificate of electrical compliance. The factor is 6.8 for batteries certified up to 31 December 2026, and 5.7 from 1 January 2027. Last checked 26 October 2026.
. Written by Nick Green.
The rule
The federal Cheaper Home Batteries discount is worked out by multiplying the battery's usable kWh by a factor. Which factor applies is set by when the battery is installed. The Clean Energy Regulator puts it simply: for a battery, the number of certificates depends on its capacity and its installation date.
In practice, the date that counts is the date on the battery's certificate of electrical compliance, or the state or territory equivalent. That is the date the Regulations use: regulation 20(8) sets the factor by the period in which the battery is certified as compliant. The certificate is issued once the installation work is finished, so it can be a day or more after the battery goes in. The Regulations give an example of a battery installed on one day and certified four days later. If the two dates fall either side of a change in the factor, the certificate date decides it.
These dates do not decide the factor:
- the date you sign the contract
- the date you pay a deposit
- the date the quote was written
The Regulations set a factor for each period. Each row below is a fact about the schedule, with its status as of today.
| Certified between | Factor |
|---|---|
| 1 May 2026 to 31 December 2026Applies now | 6.8 |
| 1 January 2027 to 30 June 2027Scheduled | 5.7 |
| 1 July 2027 to 31 December 2027Scheduled | 5.2 |
| 1 January 2028 to 30 June 2028Scheduled | 4.6 |
| 1 July 2028 to 31 December 2028Scheduled | 4.1 |
| 1 January 2029 to 30 June 2029Scheduled | 3.6 |
| 1 July 2029 to 31 December 2029Scheduled | 3.1 |
| 1 January 2030 to 30 June 2030Scheduled | 2.6 |
| 1 July 2030 to 31 December 2030Scheduled | 2.1 |
Where the schedule stands today
The period in force today runs from 1 May 2026 to 31 December 2026, with a factor of 6.8. The next scheduled period starts on 1 January 2027, with a factor of 5.7. The schedule ends on 31 December 2030. The guide to what changes for a battery installed from 1 January 2027 shows the discount either side of that change for three common sizes.
A worked case, without a price
Say you sign a contract in one period, and your battery is installed and its certificate issued after the next period has started. The factor for your battery is the next period's factor, not the one in force when you signed.
Now say the battery goes in on the last day of a period, and its certificate is issued on the first day of the next. The next period's factor applies, because the certificate date is the one that counts.
The battery rebate calculator works out the discount for any usable size at today's factor.
What happens to the prices on this site when the factor changes
The installed prices on this site are worked out after the discount at the factor in force when they were checked, so they are re-checked when the factor changes. The next re-check is set for 1 January 2027. While a price is being re-checked, the site shows no price band, so it never shows a price based on a factor that no longer applies. The fit check still works, and Nick confirms the price at the consult.
The schedule can be reviewed
The factors are written into the Renewable Energy (Electricity) Regulations, so each one is in force or legislated. The Government reviews the discount at least once a year, and the schedule is open to amendment. When we last checked, on 26 October 2026, no change to the next step had been announced. The official pages are listed below so you can read them yourself.
Next steps
The guide to the federal discount shows how each slice of a battery earns its share. The fit check gives you a suggested size, a price and the discount for your home, with no obligation.
Common questions
I signed my contract in one period. Which factor applies?
The factor for the period that holds the installation date, which in practice is the date the battery's certificate of electrical compliance is issued. Signing the contract earlier does not keep an earlier factor.
When is the certificate issued?
After the installation work is finished, so it can be a different day from the install. Nick can ask our installer partner when the certificate is expected to be issued and tell you at the consult. This site does not promise any install or certificate date.
Could the schedule change?
It could. The factors are written into the Regulations, but the Government reviews the discount at least once a year and can amend it. When we last checked, no change to the next step had been announced.
Should I pick a battery based on these dates?
Pick the battery that suits your home. The date sets the factor, and the factor is one input to the price. Take the time you need to decide.
Check what fits your home
The fit check asks a few short questions and gives you a suggested size, a price range and the federal battery discount worked out for your home. Nick only calls if you ask him to.
Start the fit checkThis site is run by Nick Green, a solar and battery adviser who works with a licensed installer partner. We do not compare installers. If your home is a good fit and you ask us to, Nick will call you and prepare a quote through that partner. No cold calls, no door knockers, no obligation.
Where the facts come from
These are the official pages behind the rules and figures on this page. Read them yourself if you want to check us.
- Federal Register of Legislation: Renewable Energy (Electricity) Regulations 2001, pinned to Compilation 91 (F2026C01001), compilation date 1 October 2026, regulations 20(7), 20(8) and 59. The latest-version link moves; the mid-scale solar amendment from 1 October 2026 does not change these regulations.
- Clean Energy Regulator: Calculate small-scale technology certificate entitlements (page last updated 18 September 2026)
- DCCEEW: Cheaper Home Batteries Program (page last updated 9 June 2026)
Last checked 26 Oct 2026
Keep reading
Home battery cost in 2026: installed prices by size and setup
Installed cash prices by size and setup, after the federal discount.
Installed home battery prices for NSW and Queensland in 2026, by size and setup, after the federal discount. Cash prices, and the date we last checked them.
Last checked 26 Oct 2026
More in this section
Battery rebate calculator: the federal discount for any battery size
Type the usable kWh on your quote to see your federal discount.
Type the usable capacity on your battery quote to see the federal Cheaper Home Batteries discount, often called the battery rebate, worked out at today's rate.
Last checked 26 Oct 2026
The federal Cheaper Home Batteries discount explained, with worked examples
How the battery rebate is worked out, with examples you can check.
How the federal Cheaper Home Batteries discount, often called the battery rebate, is worked out, why each extra kWh earns less, and worked examples to check.
Last checked 26 Oct 2026
What changes for a home battery installed from 1 January 2027
How the discount changes, what it means, and which date decides it.
From 1 January 2027 the federal battery discount factor is 5.7, down from 6.8. What that means for common sizes, and which date decides it.
Last checked 26 Oct 2026